Drone Cell Tower
Inspection Software

Fly-To-Mark Top and Bottom Altitudes

We understand how important precise mission setup is in vertical missions. With Hammer’s tower mapping mission, you can use the drone to mark the key GPS points of the tower and Hammer will automatically generate a flight path for you to capture the tower with the correct distance and overlap.

Get Started

Fly using Up-Down
or Circle Modes

Flying a tall tower? Fly up and down first to save battery! Conversely, if you are flying a short but wide tower, you can use our ‘Circles’ mode to circle around the tower and acquire images.

Get Started

View Example

Use Automatic Gimbal

One common issue in tower missions is adjusting the gimbal to look at the tower as the drone flies at different heights. With Hammer’s automatic gimbal option, the optimal gimbal pitch is automatically calculated for you based on the drone’s height and distance to the tower!

Get Started

Create 3D Digital Twins

Capturing good quality data is hard but only half the job.
With Hammer Hub, you can upload, process, annotate and share the drone data with all stakeholders,

all in 3D!

Book a call

View Example

Measure, Annotate & Create Reports

One common issue in tower missions is adjusting the gimbal to look at the tower as the drone flies at different heights. With Hammer’s automatic gimbal option, the optimal gimbal pitch is automatically calculated for you based on the drone’s height and distance to the tower!

Get Started

Hear It from Our Customers

477f59_6309f960aec24c53a6bfa43d647db590~mv2.jpeg

"Hammer combines all other flight planners into one, covering all possible mission types. No need to use multiple flight planners anymore; Hammer does it all!"

Eagle Drone, NL